MERAKI (MG21-HW-WW) MERAKI MG21 CELLULAR GATEWAY - WORLDWIDE

Note: Non-Meraki antennas are not supported. The socket is a reversed RP-SMA that is designed to detect the official MG smart dipole antennas and smart patch antenna. The usae of non-Meraki accessories may damage the MG and degrade performance. The Cisco Meraki antennas are designed for the maximum allowable gain without exceeding the EIRP for local regulatory domains on their supported bands.

Accessories

1, 3, 5, 7, 18, 19, 20, 26, 28Carrier compatibility is generally based on having compatible bands on the modem. In the open market, carriers may only require regulatory domain certifications and open market certifications, like the PTCRB and GCF, to be compatible for their network. Sometimes carriers will require additional testing before a device can be used on their network. The section Tested Carriers is based on Meraki device certifications being approved by those specific carriers. A carrier being listed above means that they have officially certified the Meraki product for their cellular network. There maybe many unlisted carriers could be functionally compatible with Meraki devices. The list of tested certified carriers is based on the carrier validating Meraki per their network parameter requirements. If a carrier you are looking to use is not listed above, it could be that they do not require additional compliance testing for their network.  

Cellular

Interfaces

Licensing

Models

MTBF Rating

MG21

ModelsMG21MG21E Dimensions (w x d x h)160.45 x 160.45 x 34.45mm165.7 x 160.45 x 34.45mm Weight (without accessories)497g489gPower Supply12V/1A, 48-57V DC/0.35A12V/1A, 48-57V DC/0.35AOperating Temperature-22°F to 122°F (-30°C to 50°C)-22°F to 122°F (-30°C to 50°C)Humidity5% to 95% non-condensing5% to 95% non-condensing

Physical Specifications

Use Cases

MG warranty coverage periods are as follows:MG21/MG21ELifetimeFull lifetime hardware warranty with next-day advanced replacement included.Applies to MG21 and MG21E hardwareMG Accessories1 YearThe following are considered accessories: Includes mounting kits, antenna, and additional power cordsAdditional warranty information can be found on the Return Policy and Requesting a RMA page of the Cisco Meraki website. If your Cisco Meraki device fails and the problem cannot be resolved by troubleshooting, contact Meraki Support to address the issue. Once support determines that the device is in a failed state, they can process an RMA and send out a replacement device free of charge. In most circumstances, the RMA will include a pre-paid shipping label so the faulty equipment can be returned. In order to initiate a hardware replacement for non-functioning hardware that is under warranty, you must have access to the original packaging the hardware was shipped in. The original hardware packaging includes device serial number and order information, and may be required for return shipping.Meraki MG21 and MG21E devices have been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.  

MERAKI (MG21-HW-WW) MERAKI MG21 CELLULAR GATEWAY - WORLDWIDE

$2222.75

Product Description

Specifications