Name: CISCO - Meraki Z4 Hardware
Brand: CISCO
SKU: Z4-HW
Price: 1619.53 AUD
Availability: BackOrder

2.4 GHz WiFi

5GHz WiFi

 Z4Radio Information802.11a/b/g/n/ac/ax 2.4 or 5Ghz) 2x2 MU-MIMOAntennas 2 x 2 MU-MIMO with two spatial streamsMaximum Data Rate1.5 Gbps** Refers to maximum over-the-air data frame rate capability of the radio chipset, and may exceed data rates allowed by IEEE 802.11ax operation.

802.11 Wireless Interface

AccessoryDescriptionMA-PWR-50WACMeraki MX Replacement Power Adapter (Z4/C) (50 Watts AC)MA-PWR-CORD-US1x AC Power Cable, US plugMA-PWR-CORD-EU1x AC Power Cable, EU plugMA-PWR-CORD-UK1x AC Power Cable, UK plugMA-PWR-CORD-AU1x AC Power Cable, AU plug

Accessories

Common event logs exist for wired and WiFi events. As such, no specific Z4 event log entries are required at this time.
For more general information about navigating the Event Log and the types of Events that could be expected please check out our Event Log documentation. 

Common Event Log Messages

Configure your Dashboard Network

  Z4Single WAN UplinkYesCellular UplinkNoStateful Firewall Throughput500 MbpsMaximum VPN Throughput250 MbpsSecurity Throughput300 MbpsPoE Capabilities Yes, 1x GbE RJ45 LAN Ports (802.3at) WiFiDual-band 2x2 WiFi 6Recommended use caseUp to 15 devices 

Context and Comparisons

LAN Interface

Ordering Guide

 Z4Mount TypeDesktop / Wall MountDimensions(h x d x w)7.25 x 4.84 x 1.10 in / 184.2 x 123 x 28 mmWeight0.86 lbs / 0.391 kgPower Supply50W DCPower Load (idle/max)11W / 42WOperating Temperature32°F - 113°F0°C - 45°CHumidity5% to 95%

Physical

Signal Coverage Patterns

 Z4Recommended Use CaseUp to 15 devicesMax Stateful Firewall Throughput in NAT mode500 MbpsMax VPN Throughput250 Mbps

Throughput and Capabilities

Troubleshooting

WAN Interface

Z-Series warranty coverage periods are as follows:ProductWarranty PeriodWarranty InformationZ4Lifetime Z4 Accessories1 YearThe following are considered accessories:SFP Modules, all mounting kits and stands, interface modules, additional power cordsAdditional warranty information can be found on the Return Policy and Requesting a RMA page of the Cisco Meraki website. If your Cisco Meraki device fails and the problem cannot be resolved by troubleshooting, contact support to address the issue. Once support determines that the device is in a failed state, they can process an RMA and send out a replacement device free of charge. In most circumstances, the RMA will include a pre-paid shipping label so the faulty equipment can be returned.In order to initiate a hardware replacement for non-functioning hardware that is under warranty, you must have access to the original packaging the hardware was shipped in. The original hardware packaging includes device serial number and order information, and may be required for return shipping.Meraki Z4 devices have been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. 

CISCO - Meraki Z4 Hardware

$1619.53 (Ex. GST)$2313.62

Save $694.09 (30%)

Product Description

Specifications

Related Licenses or Support

Related Products