CISCO - Meraki MG41 Cellular Gateway External Antennas

Accessories

Feature Specifications (MG41 vs MG21)

We only support and recommend having all 4 antenna's connected on the MG 41E.Note: Non-Meraki antennas are not supported. The socket is a reversed RP-SMA that is designed to detect the official MG smart dipole antennas and smart patch antenna. Usage of non-Meraki accessories may damage the MG and degrade performance. The Cisco Meraki antennas are designed for the maximum allowable gain without exceeding the EIRP for local regulatory domains on their supported bands.Power Adapter vs PoE : The MG can be powered using a PoE or via a power adapter. The power adapter always takes the first preference i.e if the MG is already powered via the PoE and then the power adapter is connected, then the MG will power off and power on using the adapter as the power source. The same scenario applies when the PoE and power adapter are connected simultaneously and the power source from the adapter goes down, the MG will power off and then power on. Plugging/unplugging PoE when power adapter is connected to the MG does not have any bearing on the operation of the MG as the device will always draw power from the adapter whenever it is connected.

Included In The BoxNon-Meraki Antenna not supported

Interfaces

Licensing

MG41E

Note: Non-Meraki antennas are not supported. The socket is a reversed RP-SMA that is designed to detect the official MG smart dipole antennas and smart patch antenna. Usage of non-Meraki accessories may damage the MG and degrade performance. The Cisco Meraki antennas are designed for the maximum allowable gain without exceeding the EIRP for local regulatory domains on their supported bands.

Non-Meraki Antenna not supported

To place an order for an MG41 cellular gateway, pair a specific hardware model with a single license (which includes cloud services, software upgrades and support). For example, to order an MG41E with 3 years of enterprise licensing for use in North America, order an MG41E-HW with LIC-MG41-ENT-3Y. We only support and recommend having all 4 antenna's connected on the MG 41E.Note: Non-Meraki antennas are not supported. The socket is a reversed RP-SMA that is designed to detect the official MG smart dipole antennas and smart patch antenna. Usage of non-Meraki accessories may damage the MG and degrade performance. The Cisco Meraki antennas are designed for the maximum allowable gain without exceeding the EIRP for local regulatory domains on their supported bands.Power Adapter vs PoE : The MG can be powered using a PoE or via a power adapter. The power adapter always takes the first preference i.e if the MG is already powered via the PoE and then the power adapter is connected, then the MG will power off and power on using the adapter as the power source. The same scenario applies when the PoE and power adapter are connected simultaneously and the power source from the adapter goes down, the MG will power off and then power on. Plugging/unplugging PoE when power adapter is connected to the MG does not have any bearing on the operation of the MG as the device will always draw power from the adapter whenever it is connected.MG Warranty coverage periods are as follows:ProductWarranty PeriodWarranty InformationMG41/MG41ELifetimeFull lifetime hardware warranty with next-day advanced replacement included.Applies to MG41 and MG41E hardwareMG Accessories1 YearThe following are considered accessories:Includes mounting kits, antenna, and additional power cordsAdditional warranty information can be found on the Return Policy and Requesting a RMA page of the Cisco Meraki website. If your Cisco Meraki device fails and the problem cannot be resolved by troubleshooting, contact support to address the issue. Once support determines that the device is in a failed state, they can process an RMA and send out a replacement device free of charge. In most circumstances, the RMA will include a pre-paid shipping label so the faulty equipment can be returned.In order to initiate a hardware replacement for non-functioning hardware that is under warranty, you must have access to the original packaging the hardware was shipped in. The original hardware packaging includes device serial number and order information, and may be required for return shipping.Meraki MG41 and MG41E devices have been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. 

Ordering GuideWarranty

-22°F - 158°F-30°C - 70°C-22°F - 158°F-30°C - 70°C 

Physical Specifications

Physical Specifications (MG41 vs MG21)

Technical Breakdown

Use Cases

MG Warranty coverage periods are as follows:ProductWarranty PeriodWarranty InformationMG41/MG41ELifetimeFull lifetime hardware warranty with next-day advanced replacement included.Applies to MG41 and MG41E hardwareMG Accessories1 YearThe following are considered accessories:Includes mounting kits, antenna, and additional power cordsAdditional warranty information can be found on the Return Policy and Requesting a RMA page of the Cisco Meraki website. If your Cisco Meraki device fails and the problem cannot be resolved by troubleshooting, contact support to address the issue. Once support determines that the device is in a failed state, they can process an RMA and send out a replacement device free of charge. In most circumstances, the RMA will include a pre-paid shipping label so the faulty equipment can be returned.In order to initiate a hardware replacement for non-functioning hardware that is under warranty, you must have access to the original packaging the hardware was shipped in. The original hardware packaging includes device serial number and order information, and may be required for return shipping.Meraki MG41 and MG41E devices have been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. 

CISCO - Meraki MG41 Cellular Gateway External Antennas

$4030.73 (Ex. GST)$4381.23

Save $350.50 (8%)

Product Description

Specifications

Related Licenses or Support

Related Products