Free delivery

GGuestNot signed in
You're not signed in
LoginCreate account

11/16/2026 • Security

SonicWall SSLVPN Flaw Lets Logins Slip Past SAML and MFA

CVE-2026-19868 lets someone with a valid directory password log in to a SonicWall SSLVPN without going through the SAML sign-in, and the MFA attached to it. CISA has added it to its Known Exploited Vulnerabilities catalogue, and fixed firmware is available now.

On 6 November 2026, the US cybersecurity agency CISA added a SonicWall firewall flaw to its Known Exploited Vulnerabilities (KEV) catalogue. The flaw, CVE-2026-19868, sits in the SSLVPN service of SonicOS. On a firewall set up to send VPN users through a SAML sign-in, someone holding a valid password for a different login method can get in without going through SAML at all. Any multi-factor authentication (MFA) that the SAML sign-in enforces is skipped along with it.

Fixed firmware is available, and there is a workaround if you can't update straight away. If your business runs a current-generation SonicWall firewall with SSLVPN, this one is worth half an hour of your time this week.

What happened, in plain English

Many businesses set up their VPN so that staff sign in through an identity provider such as Microsoft Entra ID or Okta. That arrangement is called SAML, and it is usually where MFA is enforced: the firewall hands the login to the identity provider, which asks for the password and the second factor.

SonicWall firewalls can also check logins against other sources, such as an LDAP directory, a RADIUS server or a TACACS+ server. CVE-2026-19868 is a failure to enforce the SAML route. In SonicWall's words, the flaw "may allow a user with valid credentials for an alternate authentication method to bypass SAML authentication controls", and successful exploitation "may also bypass SAML-enforced multi-factor authentication".

The details matter here, so this is what the primary sources say:

  • The attacker needs a valid password. This is not an anonymous break-in. The attacker needs working credentials for one of those alternate login methods. Stolen and reused passwords are common, though, and making a stolen password useless is exactly what MFA is there for.
  • Only firewalls with SAML enabled for SSLVPN logins are affected. SonicWall states the flaw "ONLY impacts the SonicOS SSLVPN interface or service if SAML is enabled for SSLVPN logins". Its workaround points to LDAP, RADIUS and TACACS+ servers configured on the firewall as the alternate routes.
  • Severity is high, not critical. SonicWall scores it CVSS 7.1, with a vector that reflects the need for credentials. CISA's own assessment, published on the NVD record, scores it 7.5. The weakness is classed as CWE-308, use of single-factor authentication.
  • Exploitation is reported, with few details. SonicWall says its security team "has investigated a report indicating potential exploitation of this vulnerability". CISA added it to the KEV catalogue "based on evidence of active exploitation" and gave US federal agencies until 20 November 2026 to fix it. The KEV entry lists ransomware use as unknown. That deadline doesn't bind Australian businesses, but it shows how seriously the flaw is being taken.

Which firewalls are affected

According to SonicWall's advisory (SNWLID-2026-0014):

  • Gen7 hardware firewalls (TZ 270, 370, 470, 570 and 670, including the W and P variants listed in the advisory; NSa 2700 to 6700; NSsp 10700 to 15700) and Gen7 NSv virtual firewalls, running SonicOS 7.3.3-7015 and older. Fixed in 7.3.4-7013 and higher.
  • Gen8 hardware firewalls (TZ 80, 280, 380, 480, 580 and 680, including the W variants listed; NSa 2800 to 5800) and Gen8 NSv virtual firewalls, running SonicOS 8.2.2-8015 and older. Fixed in 8.2.3-8015 and higher.

The TZ models in that list are common small-office firewalls, which is why we think this one is relevant to Australian small businesses.

The same advisory fixes six other SonicOS flaws. Two are in the management interface and are rated CVSS 8.8 (CVE-2026-107155 and CVE-2026-107154). One can crash the SSLVPN service without a login (CVE-2026-82308, CVSS 7.5). Two affect the TACACS+ client (CVE-2026-77708 and CVE-2026-77709), and one is a weak password hashing issue on virtual appliances (CVE-2026-19703). SonicWall's exploitation note is attached only to CVE-2026-19868, but the one firmware update covers all seven.

The real lesson: check that MFA has no way around it

We've written before about patches that arrive after the attack and about leaked credentials. This story is a different one. Plenty of businesses have turned MFA on for remote access and reasonably consider that job done. This flaw is a case where MFA was configured correctly and a second login path, which nobody was thinking about, did not require it.

That pattern applies to any remote access product. MFA only protects you if every way in requires it. Firewalls tend to collect login methods over the years: an old RADIUS server from a previous setup, a directory connection added for one project, a local account created for a contractor. Each of those is another way in, and in this case a software bug made those other ways reachable when they shouldn't have been.

The honest bit

No vendor is immune to this kind of flaw, including the ones we like and sell. Authentication bugs in VPN and remote access features have turned up across most of the major firewall brands in recent years, so this is not a reason to single out SonicWall. SonicWall published fixes, said openly that it had received a report of exploitation, and updated its advisory on 9 November with a workaround for customers who can't patch immediately.

One general point is worth making. A fix only helps once it is installed, and on firewalls that are updated by hand that can take weeks in a busy small business. Platforms that apply security updates automatically or on a schedule shorten that gap. It is something to weigh up when your current firewall is next due for replacement, and not a reason to replace anything today.

What we'd suggest you actually do

  1. Find out whether you're affected. Check whether you have a Gen7 or Gen8 SonicWall firewall and whether SSLVPN is switched on. If you use a managed IT provider, ask them and mention CVE-2026-19868.
  2. Check your firmware version. If it is 7.3.3-7015 or older on Gen7, or 8.2.2-8015 or older on Gen8, update to 7.3.4-7013 or higher, or 8.2.3-8015 or higher. Back up the configuration first and choose a quiet time.
  3. If you can't update yet, use SonicWall's workaround. For firewalls using SAML, SonicWall advises disabling or deleting any active LDAP, RADIUS and TACACS+ authentication servers configured on the firewall. Check what else relies on those servers before you do this, because other logins may depend on them.
  4. Review who has been logging in. Look through recent SSLVPN logins for anything unexpected: unfamiliar accounts, odd hours, or locations where you have no staff. Neither SonicWall nor CISA has published specific indicators to search for, so this is a common-sense review.
  5. Remove login methods you no longer use. Delete old authentication servers and unused local accounts. Fewer login paths means fewer places for this kind of flaw to matter.
  6. Reset passwords if anything looks wrong. This flaw depends on valid credentials. If you see logins you can't explain, change the passwords for those accounts and for any service accounts the firewall uses.
  7. Keep remote access on your patching list. VPN services face the internet all day. Make a monthly firmware check a routine, and subscribe to your vendor's security notices. Our post on whether your network could spot an intruder covers what to look for in between updates.

The friendly takeaway

This is not a reason to panic or to replace your firewall. The flaw is rated high, not critical. It needs a valid password, and it only affects firewalls that use SAML for SSLVPN logins. A firmware update fixes it. It is being used in real attacks, though, which is why we'd deal with it now and not leave it for next quarter.

If you're not sure whether your firewall is affected, or you'd like a second pair of eyes on how your remote access is set up, get in touch. We're happy to talk it through, with no obligation and no hard sell.

References

Contact Us

Email: [email protected]

Phone: 1300 989 334

About

Your one-stop technology hub for all your networking, security, and IT needs. From cutting-edge networking solutions to robust security products, we provide everything your business requires to stay connected, secure, and efficient. Whether you're looking for advanced hardware, software, or services, we offer reliable, innovative technology tailored to help you build and protect your digital infrastructure.

Copyright © 2026 TYONLINE TECHNOLOGY PTY. LTD. All Rights Reserved.